DSP Noise Cancellation for Icom Series of Professional Radios.
The NNTDSP.001 DSP board operates on most Icom commercial radios that have an accessory socket (except IC-F12/22 Series, IC-F51/61series and IC-F22SR).
The module is installed in the “Option” socket and a small modification is required in the radio to enable the module to work.This modification cuts the audio path of the loudspeaker and allows the insertion of the DSP board.
The programming software is set up to “enable OPT 1” on one of the assignable buttons such as P0 to P3 on the mobiles or if used with a handportable there are also the buttons above and below the PTT. Noise level is set at 6; this is adjustable by links on the module.
Supplied with full fitting instructions.
8 preselectable noise cancellation levels
Fully adaptive noise cancellation 9–35dB
low current consumption
Easy to install
Click here for datasheet
Click here for installation manual
IC-F3 & IC-F3S Handheld Series (2nd series)
IC-F3/F4GS/GT Handheld Series
IC-F31/41GS/GT Handheld Series
IC-F110/S Mobile Series
IC-F310/S Mobile Series
IC-F510 Mobile Series
IC-F1610 Mobile Series
IC-FR3100 Repeater Series
NNTDSP.001 price £59.95 incl' VAT (£49.96)